2 x 1 Port Stacked RJ45 Modular Phone Jack , 100 / 1000M Shielded RJ45 Connectors

2 x 1 Port Stacked RJ45 Modular Phone Jack , 100 / 1000M Shielded RJ45 Connectors

 

1.10/100/1000M MagRJ45
2.Stacked Tab-up modular jack
3.Shielded RJ45 Modular Jack
4.Router, PC Mainboard, SDH, PDH

 

Description:

 

2X1 Tab-up 10/100/1000M POE/POE+ RJ45 Magjack with/without leds, meeting IEEE 802.3af/at

1. Product Type Features:

1) Product Type = Connector
2) Jack Type = RJ45
3) Profile = Standard
4) PCB Mounting Orientation = Side Entry (Right Angle)/Top Entry(Vertical)

2. Mechanical Attachment:
1) Jack Configuration = 1 x 1

3. Electrical Characteristics:
1) Shielded = Yes

4. Termination Related Features:
1) EMI Finger – Bottom = Without
2) Termination Method = Solder

5. Body Related Features:
1) Port Configuration = Single/Multi
2) EMI Fingers -Top and Sides = With/ Without
3) Latch Orientation = Standard – Latch Down
4) PCB Tail Length

6. Contact Related Features:
1) Preloaded = Yes
2) Contact Termination Type = Through Hole/Surface Mount

7. Housing Related Features:
1) Connector Style = Jack

8. Industry Standards:
1) RoHS/ELV Compliance = RoHS compliant, ELV compliant
2) Lead Free Solder Processes = Wave solder capable to 240°C,

Wave solder capable to 260°C, Wave solder capable to 265°C
3) RoHS/ELV Compliance History = Always was RoHS compliant

9. Identification Marking:
1) Left LED Color (Position #1) = Green – 250 ohm resistor
2) Right LED Color (Position #2) = Green – 250 ohm resistor

10. Conditions for Usage:
1) Applies To = Printed Circuit Board
2) Environmental Conditions = Office / Premises
3) Operating Temperature (°C ) = 0 – 70/-40 – +85

 

Applications:

 

Used for networking and communication equipments such as HUB, PC card, Switch, Router, PC Mainboard, SDH, PDH, IP Phone, xDSL modem

Leave a Reply

Your email address will not be published. Required fields are marked *